Imhotep's Lab Interactive FAQ

i have built and tried a sort of bedini fan and not sure what i'm doing please can i have assistance as i have pictures and will add them and i have drawings and am really intreasted in helping research this with other professionals with whoem i have tried this and could not work out what it was doing and could not get it working.





also i tried the simple relay charger with no success

fan guys GET IN HERE!!!

and please resize this if possible

sorry about the picture size i do know if you save them locally to your HD and then open them with windows photo gallery at least on my computer it shows them in a normal size..

once again these are old pictures of the design in the middle of building i have completed and made a few test attempts with no success and advice will be really helpful as it's just siting here now and i'm not making any progress thanks for any assistence in advance.
Peace Meni.

Well, all I can say is learn the Bedini SSG then it makes the fan idea simpler.
The fan is an easy upgrade for those who do not wish to build a more complex
Bedini setup, you just need to rewind the coils properly and use the fan magnets
and bearings supplied with the fan housing.

hello electrician ok what does that mean learn becuse i have replicated imhotep and shiva's bedini ssg i belive i do note however in a number of diffrent schematics of sort of the same thing ther are sleight variations on the configuration and the diodes used.. some 2x4007 and sometimes with a n4001 so there is one area of my confusion hoever i belive i have done exact as in imhotep's diags. second is i notice you mentioned windings here and this is another area of my confusion as when i have tested the device first time and no result i was not sure if i would have to rewind the windings OR if they are ok with the way they are wound and all needed was to add the 4th post (oviously) i do understand it may be sleightly more tiresome and lazy of me on my part for not rewinding it already however i'm hesitant oviously asn i'm not sure how do i tell if a fan is preconfigured correctly in the first place and so on so i have ruled incorrect winding as 1 of a couple possible causes of the trouble other ideas i have to investigate are incorrect wireing.. and diffrent configurations.. also not sure what i am acomplishing here i do like to be able to visulise what the goal is so let me as here does this sound right i would like to try and configure a device with a solar panel as a source and then say a 12v air compressor running portably for free..? (for free energy) as an alternative to a charge and also so this idea works then the ovious qestion my colouge was asking me why do i need this device i can just use the solar panel to charge the battery.. and that kinda really confused me becuse he's made it sem like i'm trying to make things harder in the sense that this project is absoloutly useless!?!

Well, not being a Bedini fan person, all I can say is review your build and try and find the mistake...
The only difference I know of with the -007 and -001 diodes is that the -007's handle more voltage
before you get a breakdown, and I have already burnt one out on an IRO I built. (using the -007)
Now if you were doing an IRO, I likely could help you more, since I have built those. The Fan device
is a "charge multiplier" allowing you to charge more than one batt with one driver batt. Conditioned
batteries make a huge difference, and newer ones condition faster than old ones.

Sorry I could not help more, Ren and mbrownn may show up soon...