Complete Newbie

littleox · **Joined:** Tue May 19, 2009 2:08 pm **Posts:** 3

Hi Guys,

I came across the bedini process and was impressed with Imhoteps simplicity of the concept. Having decided to try it for myself, I seem to have fallen at the first hurdle, namely, getting the right parts. Electronics is not my forte and when I tried to get the them I was being quizzed with technical details. My desire is to create a charger that will desulfate and recharge 9-12 v batteries. Are the following the parts the right ones for me:

Transistor 2N3055 SI 7amps 60v - SC06768
2 x Diodes 1N4007 -SC07337
POT 1 Watt c/w 1Amp Switch 5Kohm Linear
Neon Bulb 220VAC

Much obliged for any guidance I can get!!

Many thanks,

Paul

mbrownn · **Joined:** Wed Aug 13, 2008 11:48 pm **Posts:** 152

Yes those will work however the pot is a little high in resistance making it more difficult to find the sweet spot

littleox · **Joined:** Tue May 19, 2009 2:08 pm **Posts:** 3

Thank you mrbrown! Is there a particular pot you would reccomend?

mbrownn · **Joined:** Wed Aug 13, 2008 11:48 pm **Posts:** 152

I use a 500 ohm wire wound pot

littleox · **Joined:** Tue May 19, 2009 2:08 pm **Posts:** 3

Thanks once again mrbrown, I'll go shopping today!

Imhotep's Lab Interactive FAQ

Complete Newbie

Who is online